Enameled Aluminium Flat Wire
Enameled aluminum magnet flat rectangular wire strips
Class 130/155/180/200/220 enamelled aluminum(copper) rectangular and square wire
Class 130/155/180/200/220 enamelled aluminum(copper) rectangular and square wire
Product introduction:
Enameled aluminum (copper) magnet round rectangular wires strips is made of oxygen free (copper) rod or electrical round aluminum rod by a certain size of the die drawing or extrusion of the wire, the insulation paint through many times of the winding wire. Mainly used in winding of transformers, motors, generators, and various electrical devices.
Product Range:
Wires strip thickness a: 0.80--7.0mm
Wire strip width b: 2.0--16.0mm
Recommended width ratio of conductor: 1.4<b/a<8.0
Temperature Class(℃) : 180, 200, 220
Standard : IEC60317-0-2,IEC60317-29 MW36-A
Bobbin : 30/50kg wooden spool,plastic spool,we can customize the length according to customer demand
Temperature Class(℃) : 180, 200, 220
Standard : IEC60317-0-2,IEC60317-29 MW36-A
Bobbin : 30/50kg wooden spool,plastic spool,we can customize the length according to customer demand
Special size can be made with discuss.
Application Of Enameled Square Aluminum Wire ： Transformers, generators, refrigeration systems, class C generators, UPS power supplys, electronic transformers
.jpg)
Feature
High thermal class
High chemical stability
Good mechanical properties
High breakdown voltage, good formability
Application Of Enameled Square Aluminum Wire ： Transformers, generators, refrigeration systems, class C generators, UPS power supplys, electronic transformers
Aluminum (copper) Wires Strips:
Enameled aluminum (copper) magnet round rectangular wires strips, is made by soft (copper) flat and soft (copper) flat wire in accordance with the provisions of the 5584.2-85 GB, 20℃when the resistivity is not greater than 0.01724Ω.mm2/m according to different mechanical strength requirements, the provisions of the semi hard (copper) conductor and aluminum conductor according to different mechanical strength requirements, semi hard (copper) conductor of non proportional C1Rp 0.2 (>100--180) N/mm2, C2Rp0.2 (>180--220) N/mm2, C3Rp0.2 (>220--260) N/mm2. 20 degrees of resistivity is less than 0.02801 Ω.mm2/m according to different electrical insulation requirements, selection of thin film 0.06--0.11mm or the thickness of the film 0.12--0.16mm. The heat adhesion paint package flat wire self-adhesive layer thickness is generally 0.03--0.06mm. Our company the loss tester for TD11 painting process for screening, the film fixed more hasten is perfect.
* If have special demand on paint thickness, please contact us as well.
Material
Drawing or extruding bare aluminum (copper) wire confirm to National Standard, smooth surface, no defects ;Good performance,Insulation varnish.
Product type:
130 grade Polyester enameled aluminum (copper) flat round wire
180 grade polyesterimide enameled aluminum (copper) flat round wire
200 grade Polyimide and polyimide mixed enameled aluminum (copper) flat round wire
120(155) grade polyvinyl acetal enameled aluminum (copper) flat round wire
Specs of Enameled aluminum (copper) magnet round rectangular wires strips
| Type | Polyesterimide |
Polyimide and polyimide mixed |
Polyvinyl acetal | Thermal bonding acetal |
|---|---|---|---|---|
| Temperature-resist grade | 180 | 200 | 120(155) | 120 |
| Property |
High heat resistance, good chemical resistance, hydrolysis resistance |
Excellent heat resistance, strong resistance to chemical solvents, good scratch resistance |
Excellent resistance to transformer oil, good resistance to scratch, excellent flexibility and adhesion, and good water resistance. |
In addition to all the performance with acetal, also can obtain good adhesion strength by the heating mode |
| Standard | GB/T7095.4-2008, IEC60317-28 | GB/T7095.6-2008, IEC60317-29 | GB/T7095.2-2008, IEC60317-18 | |
|
Testing Standard |
GB/T4074, IEC60851-1-6 | |||
Application :
Typical applications include:
Motor
Watt hour meter
Transformer
Generator
UPS power source
Electric welding machine
Inductive coil
Production Process :
Packing Process :
Step 1 : Plastic film packaging, ensure neat and clean, dry;
2. Step 2 : Two kinds of paper box packaging, clean and tidy;
3. Step 3 : Wooden box packaging, the outside fixed with packing belt, safe and reliable;
RELATED READ：
