Non-woven Aluminium Wire
Polyester Film / Non-woven Fabrics Wrapped Aluminum/Copper Wires Strips
Product introduction:
This product is made of oxygen free copper rod or electrical round aluminum rod through a certain specification of the die extrusion or drawing after annealing treatment of the wire, and then on the copper / aluminum wires strips on the 2-3 layer of polyester film or Non-woven Fabrics electrical insulation layer of the winding wire, the product is good, temperature resistance and other grade 130for B grade, mainly used for air core reactor.
Conduct Materials:
Aluminum flat wires strips should follow the standard of GB5584.3-2009, at 20℃ the conductivity resistivity is not more than 0.028mm2/m.
Copper flat wires strips should follow the standard of GB5584.2-2009, at 20℃ the conductivity resistivity is not more than 0.017241mm2/m.
Product breakdown voltage should follow below table:
| Wrapping type | Insulation Thickness(mm) | Breakdown voltage above | |
|---|---|---|---|
| Standard Value | Tolerance | ||
| 2 layers of polyester films | 0.22 | ±0.03 | 5000 |
| 2 layers of polyester films+1 layer of non-woven fabrics | 0.33 | ±0.03 | 5000 |
| 3 layers of polyester films | 0.30 | ±0.03 | 7500 |
| 3 layers of polyesters film+ non-woven fabrics | 0.42 | ±0.03 | 7500 |
Packing Process :
Step 1 : Plastic film and kraft paper packaging, ensure neat and clean, dry ;
2. Wooden box packaging, the outside fixed with packing belt, safe and reliable ;
RELATED READ：
